Leave Your Message
The Federative Republic of Brazil is undergoing an unprecedented structural transition in its natural gas industry. Catalyzed by the enactment of the *Nova Lei do Gás* (New Gas Law - Federal Law No. 14,134/2021) and the rapid opening of the open-access transport regime, Brazil has shifted from a state-dominated monopoly toward a competitive, multi-operator ecosystem. This regulatory breakthrough has paved the way for diversified natural gas producers, independent shippers, LNG terminal operators, and non-regulated free consumers (*consumidores livres*) across major industrial states such as São Paulo, Rio de Janeiro, Bahia, Minas Gerais, and Espírito Santo.
With monumental offshore production surging from the Santos and Campos Basin Pre-Salt (*Pré-Sal*) offshore reservoirs, immense volumes of associated gas must be collected, sweetened, dehydrated, and accurately measured before entering the national interconnected transport grid managed by transport system operators such as TAG (Transportadora Associada de Gás), NTS (Nova Transportadora do Sudeste), and TBG (Transportadora Brasileira Gasoduto Bolívia-Brasil). In this hyper-dynamic trading and transportation environment, custody transfer precision is not simply a technical requirement—it is the direct financial bedrock of contractual settlement, royalty auditing, and fiscal accountability.
Offshore FPSOs and onshore gas processing units (UPGNs like Gaslub Itaboraí and Caraguatatuba) demand heavy-duty, high-pressure metering skids built to withstand continuous operational throughput with zero margin for measurement error.
Bilateral trading between private power plants (UTEs), ceramic complexes, steel mills, and chemical plants requires localized city gate stations and custody transfer units with integrated gas chromatographs and remote telemetry.
Brazil's sugar and ethanol sector is accelerating agricultural biomethane production. Injecting upgraded biomethane into local concessionaire grids (Comgás, Naturgy, Gasmig, Bahiagás) requires modular, intelligent metering stations.
As Brazilian industrial clusters seek cost-efficient energy transition pathways to replace fuel oil and coal with natural gas, the installation of custom skid-mounted Pressure Regulating and Metering Stations (PRMS / *Estações de Regulagem e Medição de Pressão - ERMP*) and City Gate Skids has become paramount. Custom Natural Gas Metering Skid suppliers must address Brazil's unique ambient humidity, coastal salinity, high ambient temperatures, and strict regional metrological compliance mandates.
In Brazil, natural gas custody transfer and fiscal measurement systems are governed by the rigorous *Portaria Conjunta ANP/INMETRO nº 1/2000* (and subsequent updates). Our engineered metering skids integrate dual or multi-run metering runs (N+1 redundancy) equipped with advanced multipath ultrasonic flow meters (AGA-9), Coriolis mass flow meters (AGA-11), or precision orifice plates (AGA-3 / ISO 5167) that guarantee absolute uncertainty levels within ±0.3% to ±0.7%.
Every metering skid is pre-assembled on a structural carbon steel frame and incorporates multi-stage cyclone separators, coalescing filter-separators, automated liquid blowdown, electrical or indirect water-bath pre-heating systems (to counter Joule-Thomson cooling during massive pressure drops), active-monitor pressure regulation streams, slam-shut safety valves (SSV), and dual online process gas chromatographs for real-time calorific value / Wobbe index calculation.
1. Thermal Power Plants (UTEs): Gas-to-wire generation facilities located in Rio de Janeiro, Maranhão, and Sergipe require ultra-high capacity metering skids with rapid modulation capability to support sudden load balancing on the National Interconnected System (SIN).
2. Offshore FPSO Topside Skids: Santos Basin deepwater pre-salt platforms necessitate compact, weight-optimized, vibration-resistant skid frames incorporating super duplex stainless steel piping for sour gas handling.
3. Heavy Industrial Clusters (Automotive, Metallurgy, Glass): Industrial parks in the ABC Paulista region, Betim (MG), and Camaçari Petrochemical Hub (BA) rely on custom PRMS skids delivering constant downstream pressure and accurate billing verification.
Our story is one of enduring expertise. With a heritage of design and manufacturing excellence dating back to 1965, we possess over half a century of institutional knowledge. This longevity is not merely a measure of time, but a testament to our ability to adapt, innovate, and consistently meet the evolving demands of global industry. Unlike assemblers who rely on third-party components, we maintain comprehensive, in-house manufacturing capabilities.
Our vertically integrated production chain includes precision forging, casting, heat treatment, advanced welding, high-precision machining, assembly, and rigorous performance testing. This end-to-end control, augmented by our advanced technical inspection protocols, ensures that every component meets our exacting standards for durability and performance before it ever leaves our facility.
We deeply understand our clients' process requirements and deliver tailor-made gas solutions — not just standard products off the shelf.
Continuous investment in R&D. We have independent expertise in PSA adsorbent optimization, cold box thermodynamic design, and natural gas membrane separation.
Our equipment complies with international standards (CE / ASME). Localized documentation and multilingual after-sales support have been deployed across all major export regions.
Full-process quality control from material selection and design to factory acceptance testing. We guarantee ≥99% equipment availability with rapid spare parts response.
Rigorous factory acceptance testing and redundant design ensure long-term stable operation, suitable for 24/7 continuous production conditions.
A global technical support network provides remote diagnostic feedback within 48 hours, with critical spare parts shipped worldwide by air.
Process package design → equipment procurement → installation & commissioning → operator training. Full turnkey capability for large-scale engineering projects.
Products are certified to CE, ISO 9001, ASME and other international standards, enabling seamless entry into European, North American, and Middle Eastern markets.
An in-house process research team with deep expertise in PSA molecular sieve optimization, cryogenic insulation, and natural gas membrane separation.
We support brand-label manufacturing and non-standard equipment customization, with established long-term OEM partnerships with multiple international brands.
